STUDIO
N11
Power amplifier based on IceEdge technology developed by Icepower and available in stereo (N11) or dual mono (N11-DM) version
ICE edge is perhaps the world's most advanced class-D chipset, consisting of a dual-channel controller IC and two gate driver ICs used in conjunction with external MOSFETs. All relevant protection, diagnostics and maintenance functions are integrated in the ICEedge.
-
DUAL MONO DESIGN: two channels are completely separate and with the completely identical physical layout but with the dual mono design.
-
PROTECTIONS: the protection scheme in ICEedge includes pre-warning before shutdown, accurate and fast temperature measurement of MOSFETs as well as temperature compensated cycle-by-cycle current limit.
-
CDC (Continuous Dead-time Compensation): ICEpower proprietary mechanism that adds small continuous compensation adjustments to the gate driver output timing derived from the previously measured PWM switch timing. In other words, based on the effective timing of the power stage MOSFETs, the ICEedge driver will maintain the optimal timing of the complete power stage and thus provide optimal low distortion.
Module-based Class D stereo power amplifier ICEpower 2000AS2 HV which uses the new ICEedge chip. Integrated SMPS power supply with PFC (power factor correction) combined with two high power class D amplifiers. Like the STUDIO N-10 it is a powerful, transparent, detailed amplifier with an incredible musical texture. Compared to the N-10 model, the power has been increased, while the minimum load impedance has been increased from 2.7ohm to 3ohm.
The inputs are balanced but there is the possibility of adding a passive connection card which allows for both XLR and RCA connectors on the rear panel.
0,001%
THD + N (1W/1kHz)
2 x 1000
WATTS@4OHM
2 x 1000
WATTS@8OHM
DUAL MONO
The integrated asymmetrical power supply of the Icepower2000AS2 module means that the maximum power that can be supplied is obtained using only one of the two class D amplifier channels. Therefore, for those who need much more power and dynamics, we realize the STUDIO N-11 DM, a dual mono power amplifier based on two ICEpower2000AS1 HV modules (the mono version of the ICEpower2000AS2 module) each one equipped with integrated SMPS power supply combined with one high quality class D amplifier. .
0,001%
THD + N (1W/1kHz)
2 x 2000
WATTS@4OHM
2 x 1400
WATTS@8OHM
STEREO
Technology: Icepower2000AS2
Max Output power: 2x1000W (4Ω), 2x1000W (8Ω)
Continuous output power: 2x145W (4Ω)
Maximum output current = 38A
Distorsion THD + N (1W/1kHz) = 0.001%
Minimum load impedance = 3Ω
Dynamic range = 128db
SNR = 135db
Frequency Response: 3hz-40Khz
Voltage Gain: 29,7db
Input Impedance 38Kohm
Output idle noise (A) = 38µV(A)
Mains: Universal mains, auto select (100-240 V, 50-60 Hz)
Inputs: balanced (XLR)
Casing: black metal with aluminium front and rear panel
Measurements: 435x300x80mm
Weight: 7kg
DUAL MONO
Technology: 2 x Icepower2000AS1
Max Output power: 2x2000W (4Ω), 2x1400W (8Ω)
Continuous output power: 2x290W (4Ω)
Maximum output current for each channel = 38A
Distorsion THD + N (1W/1kHz) = 0.001 %
Minimum load impedance = 3Ω
Dynamic range = 128db
SNR = 135db
Frequency Response: 3hz-40Khz
Voltage Gain: 29,7db
Input Impedance 38Kohm
Output idle noise (A) = 38µV(A)
Mains: Universal mains, auto select (100-240 V, 50-60 Hz)
Inputs: balanced (XLR)
Casing: black metal with aluminium front and rear panel
Measurements: 435x400x80mm
Weight: 9kg